Task 5-1: Configure OSPF as the PE-CE Routing Protocol

  1. Disable EIGRP and RIP and configure OSPF on the CE routers.  Us OSPF process 1 for CustA and process 2 for Cust B (Area 0 - WAN interface towards PE routers, Area 1 - Ethernet)
  2. Cofigure OSPF VRF’s on PEs
  3. Redistribute OSPF into MP-BGP
  4. Redistribute MP-BGP into OSPF

Commands:

router# show ip bgp vrf vrf-name
router# show ip vrf detail
router# show ip ospf database
router# show ip route vrf vrf-name

This page has the following sub pages.