This lab consists of two pops each containing 2 CE (customer routers).
The core network consists of 2 P routers with 2 PE routers connecting the POPS to the core.

POP1 (CE11A, CE11B)
POP2 (CE12A, CE12B)
POP1 PE (PE11)
POP2 PE (PE12)
CORE (P11, P12)
<Router Configs>

MPLS Configuration Tasks
Enable CEF switching
Configure LDP on every label-enabled interface
Optional:
Configure the MPLS ID
Configure MTU size for labeled packets
Configure conditional label advertising
MPLS Commands

VRF Configuration Tasks
Create a VRF table
Assign RD to the VRF
Specify export and import route targets
(Optional) Configure a CPN ID
Assign interfaces to VRFs
VRF Commands

VRF Monitoring
VRF Monitoring Commands

MP-BGP Tasks
Configure BGP routing between PEs
Configure BGP address family VPNv4
Activate configured BGP neighbor for VPNv4 router exchange
Specify additional parameters for VPNv4 route exchange (filters, next hops, and so on)
MPLS MP-BGP

MP-BGP Monitoring
MP-BGP Monitoring

Per-VRF Static Routes
Configure Static Route
Redistribute into BGP
VRF Static Commands

RIP PE-CE Routing
RIP PE-CE Commands

EIGRP PE-CE Routing
EIGRP PE-CE Commands

SOO EIGRP PE-CE Loop Preventation
Configure a unique SOO value for each VPN site.
must be configured on the PE-CE interface
Configure the SOO attribute using a route-map
SSO EIGRP Commands

BGP PE-CE Routing
Configure per-VRF BGP Routing Context
BGP PE-CE Commands

OSPF PE-CE Routing

OSPF PE-CE Commands

MPLS VPN Commands

Seting up IS-IS
Enable IS-IS routing and specify an IS-IS process for IP
Configure NETs for the routing process
Enter interface configuration mode
Specify the interfaces that should be actively routing IS-IS
IS-IS Commands